With instant data and big data as a paramount concern, computers and other electronic devices are shifting to higher frequencies. It represents an additional challenge when it comes to specifying the right plastic materials vs. frequencies. Daikin supports the electronic devices producers with a full portfolio of polymers having different electrical properties, as well as broad expertise in electronic design.
Why Fluoropolymer have interesting electrical properties?
The electrical stability of fluoropolymers, is due to their symmetrical molecule structure (C2F4)n and the short distance between the carbon and fluorine.
Low relative dielectric constant materials
Fluoropolymers are electrically stable and less sensitive to high frequencies.
Fluoropolymers such as PTFE have the lowest dielectric constant and the lowest loss against any plastics. For this reason, they are widely used for applications, such as insulation materials, coaxial cable, robot wiring and printed circuit board.
High relative dielectric constant and low dielectric loss tangent material
Daikin innovates with NEOFLON VT-6630 a unique high dielectric constant and low dielectric loss tangent fluoropolymer. This breakthrough in the plastic field, outperform conventional resins and oppose a relative permissivity exceeding 9 εr. NEOFLON VT-6630 fit in miniaturization challenges and is particularly adapted to film for capacitors.
|High frequency||Low frequency|
|Dielectric constant||Dielectric loss tangent||Dielectric constant||Dielectric loss tangent||
|OPTOACE conformal coating||-||-||-||-||1020～22|
*measurement value of coating film blended with curing agent
The above numeric values are representative and not guaranteed.
Designing an electronic device in the miniaturization context is made difficult by the variety of system operating. Beyond the chemical characteristic of the selected plastics, many criteria must be considered such as part thickness, conversion process additive used, etc. The most central measure considered is the dielectric constant. To fit on a broader array of needs, DAIKIN proposes fluoro-based material having low and high relative dielectric constants.
- Under-the hood wires
- LAN cable
- Base station
- Coaxial cable
- Lithium ion secondary battery
- Wind-power generation
- Photovoltaic solar cell
- Printed board