关闭

不稳定

Friction represents a significant waste of power not to mention maintenance cost. In manufacturing and operating contexts where tiniest improvements help with differentiation, engineers are now concentrating their efforts in wear reduction. 氟聚合物 and materials based on fluorine, undisputably offer the mechanical strength, 硬度, and fatigue resistance to help parts move better, faster and last longer.

关于

Low friction solutions to optimize production processes

In a production process, parts having a lower coefficient of friction benefit from longer life cycles, reduce replacement costs and increase processes' efficiency and speed.
Daikin fluoropolymers and expertise support the manufacturing processes involving frequent friction thanks to materials suitable for gears, 海豹, 和轴承. Made with NEOFLON, gears or bearing also increase sliding speed and contribute to lower temperatures.
Daikin mold release agents, 添加剂, and processing aids impart an increased slipperiness to parts being produced contributing to the improvement of manufacturing speed and quality.

Low friction materials support automotive emission challenge 

在汽车, friction cause significant losses of energy, generates emission as well as increase the overall temperature. 聚四氟乙烯 micro powder lubricant for improved lubricity of PC, PA, and other standard polymers

Slippery surface to improve touchscreen experience

The demand for instant data and responsiveness strains designers of touchscreens and consumer electronics to seek for the smoothest touch glide experience for their clients. Standard glass screen often slows down this feeling. Daikin research on fluorine material enabled the development of OPTOOL, a thin transparent coating which reduces of 50% the coefficient of friction of a glass substrate.

Priority from general material "D" : A+>A>B>C>D

产品 属性
Dynamic friction coefficient Maximum static friction coefficient

含氟聚合物

含氟聚合物 films

氟涂料

聚合物添加剂

聚四氟乙烯 A A
PFA,聚全氟乙丙烯 A A
ETFE EFEP,
CPT, PCTFE
B B
涂料树脂* B B
Water and oil repellents B B
OPTOOL anti-smudge coating A+ A+
Mold release agents B B

*measurement value of coating film blended with curing agent
The above numeric values are representative and not guaranteed.

我们的解决方案

氟聚合物

氟聚合物

氟聚合物 are widely used because of their unique non-adhesive and low friction properties as well as their superior heat, chemical and weather resistance and superior electrical properties.

氟涂料

含氟聚合物 coatings

Daikin’s fluoro coatings allow for the users to enhance the processability of the products and to impart improved characteristics to the final parts.

OPTOOL anti-smudge coating

OPTOOL anti-smudge coating

OPTOOL is an anti-smudge coating for specifically engineered-to-protect display, 光学, and glass surfaces. 

Water and Oil Repellents

Water and oil repellents

UNIDYNE water and oil repellents impart excellent water and oil repellency as well as stain release.

涂料树脂 and 添加剂

涂料树脂

ZEFFLE Series are designed to meet building and constructions most strict outdoor specifications. 

聚合物添加剂

聚合物添加剂

Daikin's lubricants 添加剂, anti-dripping modifiers, and processing aids allow for the processors and end-users to benefit in compounded materials. 

Mold Release agents

DAIFREE mold release agents

DAIFREE is based on the fluoro technology offering efficient demolding performances for elastomers and plastics.  

含氟聚合物 Films

含氟聚合物 films

含氟聚合物 films provide parts or production processes outstanding chemical resistance, 透明度, weather resistance, heat resistance or more functions.

应用程序

solustions for lubricity

solustions for lubricity

solustions for lubricity

In the fluoro material, the balance between the carbon and fluorine electron attractiveness of -CF 2 -  is exquisite, so it becomes almost nonpolar, and the affinity with various chemicals is extremely low. That's why, the surface of fluoro material is smoothy.

  • 齿轮
  • 轴承
  • 触摸屏
  • High temperature release film